Buffalo CR886 Instruction Manual page 4

UK
Gas, regulator and hose
• For use with LPG bottled gas only. A suitable regulator must
be used for butane, propane or mixes.
• LP gas cylinders should rest on a stable, flat surface.
• Do not place the gas bottle directly underneath the barbecue.
• LP gas cylinders should never be stored or laid on their side, in
the horizontal position. A leak would be very serious and liquid
could enter the gas line with serious result.
• Ensure to use gas hoses with heatproof temperature of higher
than 80°C.
• The hose should hang freely with no bends, twisting, tension,
folds, or kinks that could obstruct free flow of gas. Always
inspect the hose for cuts, cracks, perishing, or excessive wear
before use.
• Apart from the connection point, no part of the hose should
touch any hot barbecue parts. If the hose shows any sign of
damage, replace it immediately with one suitable for use with
LP gas which meets the national standards for the country of
use.
• Before use, ensure to check for gas leak ( Gas leak testing).
This is the only safe and sure way to detect any gas leaking
from joints and connections of the barbecue after assembly.
• Perform leak test annually, and whenever the gas cylinder is
disconnected or reconnected.
• Do not use an open flame for gas leak test at any time.
• In case of gas leak or gas odour:
- Stop using the appliance and turn off gas supply to it.
- Extinguish any open flame.
- Check for damages, poor connections, etc.
- If odour continues, contact your local dealer.
4
CR886_UK_A5_v2_20190515.indb 4 2019/5/15 17:27