The tool should be connected only to a power supply of EC Declaration of Conformity the same voltage as indicated on the nameplate, and Makita declares that the following Machine(s): can only be operated on single-phase AC supply. They Designation of Machine:...
Page 3
Avoid body contact with earthed or grounded available from: surfaces such as pipes, radiators, ranges and Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. The conformity assessment procedure required by...
17. If devices are provided for the connection of dust Hold power tool insulated gripping extraction and collection facilities, ensure these surfaces, when performing an operation are connected and properly used. Use of dust where the cutting accessory may contact collection can reduce dust-related hazards.
Bit grease (optional accessory) FUNCTIONAL DESCRIPTION 1. Bit shank CAUTION: 2. Grease Always be sure that the tool is switched off and • unplugged before adjusting or checking function on the tool. Switch action CAUTION: 015228 Before plugging in the tool, always check to see •...
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be MAINTENANCE performed by Makita Authorized Service Centers, always using Makita replacement parts. CAUTION: Always be sure that the tool is switched off and •...