For Better Video From Dvd - Panasonic SC-HT800V Operating Instructions Manual

For better video from DVD

The following connections are for video from the DVD section only. Make sure you have connected the VIDEO OUT terminal with the
television to view video from the VCR section (➡ page 12).
You may need to change the video-input mode on the television to view video from the VCR and DVD sections. Read your television's
operating instructions for details.
∫ Connecting a television with COMPONENT VIDEO terminals
DVD/
DVD
VCR
DVD/
DVD EXT
VCR
VIDEO VIDEO
OUT IN
Y
P /C
B B
P /C
R R
COMPONENT S-VIDEO
LINE LINE
VIDEO OUT OUT
OUT IN
Video cables
(not included)
Y
P
B
P
R
COMPONENT
VIDEO IN
∫ Connecting a television with an S-VIDEO IN terminal
DVD/
DVD EXT
VCR
VIDEO VIDEO
OUT IN
Y
L
P B /C B
R
P /C
R R
COMPONENT S-VIDEO LINE LINE
VIDEO OUT OUT OUT IN
S-video cable
(not included)
S VIDEO
IN
EXT
RF IN RF OUT
LOOP EXT
75
L
FM ANT AM ANT
LOOP
ANT
R
GND
To television
Television
(not included)
RF IN RF OUT
LOOP EXT
75
FM ANT AM ANT
LOOP
ANT
GND
To television
Television
(not included)
COMPONENT VIDEO OUT terminal
These terminals can be used for either interlace or progressive
output and provide a purer picture than the S-VIDEO OUT
terminal. Connection using these terminals outputs the color
difference signals (P /P ) and luminance signal (Y) separately in
B R
order to achieve high fidelity in reproducing colors.
≥The description of the component video input terminals depends
on the television or monitor (e.g. Y/P
Connect to terminals of the same color.
≥After making this connection, change the black level for a better
picture (➡ page 31, Video—Black Level Control).
To enjoy progressive video
≥Connect to the component video input terminals on a 480P
compatible television. (Video will not be displayed correctly if
connected to an incompatible television.)
≥All televisions manufactured by Panasonic and that have 480P
input connectors are compatible. Consult the manufacturer if you
have another brand of television.
S-VIDEO OUT terminal
The S-video terminal achieves a more vivid picture than the VIDEO
OUT terminal by separating the chrominance (C) and luminance
(Y) signals. (Actual results depend on the television.)
[Note]
Connect to a different terminal group than that you used for the
video cable (e.g., "VIDEO 2").
Picture from this unit's VCR will not appear when you use the
same group input terminal connections because the S-video
terminal input takes precedence.
/P , Y/B-Y/R-Y, Y/C /C ).
B R B R
RQT6951
13