Panasonic SC-HT800V Operating Instructions Manual page 11

2
STEP Speakers
Speaker cables
≥3a4-m (13-foot) cables
≥2a10-m (33-foot) cables
The illustrations show SC-HT810V.
Setup example
[1] Attaching the stickers to the speaker
cables
Attach the speaker-cable stickers to make connection easier.
Short cables
Copper
Silver
Long cables
Keeping the cables out of the way (SC-HT810V only)
Pass the cables through the holes in the stand to keep them out of
the way.
1 Pass the cable through the hole.
Stand
2 Pass through the cutout in the base.
Sheet of speaker-cable
stickers
SC-HT790V, SC-HT800V
The front and surround speakers are the same. Use those you
have connected the short cords to as front speakers and those you
have connected the long cords to as surround speakers.
[2] Connecting the speakers
Front (L)
Subwoofer
[Note]
≥Never short-circuit positive (i) and negative (j) speaker wires.
≥Be sure to connect only positive (copper) wires to positive (i)
terminals and negative (silver) wires to negative (j) terminals.
Incorrect connection can damage the speakers.
Caution
Hold the speakers by the sides.
Applying pressure to the front
net can damage the speaker.
_ :
Copper
` :
Silver
Front (R)
Surround (L)
Surround (R)
Center
Click!
RQT6951
11