Related Manuals for Makita XHU02M1
Summary of Contents for Makita XHU02M1
- Page 1 INSTRUCTION MANUAL Cordless Hedge Trimmer XHU02 012444 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model XHU02 Blade length 560 mm (22") Strokes per minute 1,350 /min Rated voltage D.C.18 V Overall length 948 mm (37-1/4") 963 mm (38") Net weight 3.0 kg (6.7 lbs) 3.3 kg (7.4 lbs) Standard battery cartridges BL1815/BL1815N BL1830/BL1840 •... -
Page 3: Hedge Trimmer Safety Warnings
16. If devices are provided for the connection of 27. Under abusive conditions, liquid may be dust extraction collection facilities, ejected from the battery; avoid contact. If ensure these are connected and properly used. contact accidentally occurs, flush with water. Use of dust collection can reduce dust-related If liquid contacts eyes, additionally seek medical help. - Page 4 USG001-2 Never use the trimmer when under the influence of alcohol, drugs or medication. WARNING: 10. Work gloves of stout leather are part of the basic Use of this product can create dust containing chemicals equipment of the hedge trimmer and must always which may cause respiratory or other illnesses.
-
Page 5: Functional Description
A battery short can cause a large current flow, FUNCTIONAL DESCRIPTION overheating, possible burns and even a breakdown. Do not store the tool and battery cartridge in CAUTION: locations where the temperature may reach or Always be sure that the tool is switched off and the •... - Page 6 Lithium-ion batteries with a star marking are equipped with a protection system. This system automatically cuts off power to the tool to extend battery life. The tool will automatically stop during operation if the tool and/or battery are placed under one of the following conditions: Overloaded: •...
-
Page 7: Indication Lamp
Indication lamp 1. Indication lamp 012480 Running the tool allows the indication lamp to show the battery cartridge capacity status. When the tool is also overloaded and has stopped during operation, the lamp lights up in red. Refer to the following table for the status and action to be taken for the indication lamp. - Page 8 Do not attempt to cut branches thicker than 10 mm Attaching the chip receiver (optional accessory) on the diameter with this trimmer. These should first be cut with tool when trimming the hedge straight can avoid cut off shears down to the hedge trimming level. leaves’...
-
Page 9: Maintenance
Press the chip receiver on the shear blades so that its Blade maintenance slits overlap with the nuts on the shear blades. Smear the blade before and once per hour during operation using machine oil or the like. 1. Hooks 2. - Page 10 1. Grease 1. Screws 2. Sponge 3. Washer 012454 012451 Loosen four screws and remove the blades. Remove the 1. Grease washer and sponge from the shear blades and put them aside. They are required for the later installation. 1. Gear 2.
-
Page 11: Optional Accessories
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Learn more about outdoor tools and equipment we have.