Makita PB002G Instruction Manual
Cordless portable band saw
Hide thumbs
Also See for PB002G:
- Instruction manual (79 pages) ,
- Instruction manual (77 pages) ,
- Instruction manual (65 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita PB002G
Summary of Contents for Makita PB002G
- Page 1 INSTRUCTION MANUAL Cordless Portable Band Saw PB002G Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: PB002G Max. cutting capacity Round workpiece 127 mm dia. Rectangular workpiece 127 mm x 127 mm Blade speed 0 - 3.2 m/s (0 - 192 m/min) Blade size Length 1,140 mm Width 13 mm Thickness 0.5 mm Dimensions (L x W x H) with BL4040... -
Page 3: Ec Declaration Of Conformity
Electrical safety Vibration Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any The vibration total value (tri-axial vector sum) deter- adapter plugs with earthed (grounded) power mined according to EN60745-2-20: tools. Unmodified plugs and matching outlets will Work mode: cutting metal reduce risk of electric shock. - Page 4 Do not let familiarity gained from frequent use Keep handles and grasping surfaces dry, clean of tools allow you to become complacent and and free from oil and grease. Slippery handles and ignore tool safety principles. A careless action can grasping surfaces do not allow for safe handling and cause severe injury within a fraction of a second.
- Page 5 Avoid storing battery cartridge in a con- causing fires, personal injury and damage. It will tainer with other metal objects such as also void the Makita warranty for the Makita tool and nails, coins, etc. charger. Do not expose battery cartridge to water Tips for maintaining maximum or rain.
-
Page 6: Functional Description
Indicating the remaining battery capacity FUNCTIONAL DESCRIPTION Press the check button on the battery cartridge to indi- cate the remaining battery capacity. The indicator lamps light up for a few seconds. CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. -
Page 7: Overheat Protection
Electric brake This tool is equipped with an electric brake. If the tool consistently fails to quickly stop after the switch trigger is released, have the tool serviced at a Makita service center. Electronic function The tools equipped with electronic function are easy to operate because of the following feature(s). - Page 8 Open position Lighting up the front lamp CAUTION: Do not look in the light or see the source of light directly. Pull the switch trigger to light up the lamp. The lamp keeps on lighting while the switch trigger is being pulled. The lamp goes out approximately 10 seconds after releasing the switch trigger.
- Page 9 To install the band saw blade: Insert the non-serrated side of the band saw blade into the upper holder and lower holder. Make sure the Turn the blade tightening lever clockwise until it band saw blade in both upper and lower holder touches stops.
-
Page 10: Operation
Adjusting blade track OPERATION When the band saw blade tends to slip out from the wheel, adjust the blade track. CAUTION: Always insert the battery cartridge To adjust, insert the hex wrench into the adjustment all the way until it locks in place. If you can see the hole as illustrated and make a quarter turn clockwise. red indicator on the upper side of the button, it is not After that, check if the band saw blade does not slip out. -
Page 11: Maintenance
CAUTION: When cutting cast iron, do not use any cutting wax. When cutting metals, use Makita cutting wax as a cut- Fig.15 ting lubricant. To apply the cutting wax to the teeth of the band saw blade, remove a cap of the cutting wax, Hold the tool with both hands as illustrated. -
Page 12: Optional Accessories
• Makita genuine battery and charger To replace the rubber tire, ask for the Makita Authorized or Factory Service Centers. NOTE: Some items in the list may be included in the tool package as standard accessories.