General Safety Guidelines - Hitachi ZA3000 Series Instruction Manual

SAFETY SUMMARY

General Safety Guidelines

Precautions before Use
 Before using the instrument, be sure to read this manual
carefully until you fully understand its contents.
 Keep this manual in a safety place nearby so that it can be
referred to whenever needed.
 Operate the instrument in the procedure given in this manual.
 Be sure to understand and observe the safety instructions
given in this manual.
 Be sure to observe the cautions indicated on the instrument
and in the manual. If this is neglected, personal injury or
instrument damage may be caused.
 Be sure to follow the original usage of the product and the
usage specified in this manual.
 Never attempt modification of the instrument, use of a part
other than specified and instrument operation with safety
devices released, because they are dangerous.
 Do not perform operations other than those described in the
instruction manual. If any problem occurs on the instrument,
contact our sales representative or service office.
 In analysis with the atomic absorption spectrophotometer,
flame ignition or graphite furnace heating is performed.
Be sure to carry out analysis in the presence of the analyst.
Unattended operation is prohibited.
 When using chemicals for analytical operation, be sure to
provide proper ventilation of the laboratory room per local
requirements. Inadequate ventilation could endanger human
health.
SAFETY - 2