Introduction; About Makita Industry Tool Settings For The Td/Tw Series; Notes; Terms Of Use - Makita TD Series User Manual

1. Introduction

1-1. About Makita Industry Tool Settings for the TD/TW series

Makita Industry Tool Settings for the TD/TW series is a system that the user can use to set the operation of
Makita cordless tools by connecting the PC to Makita cordless tools with a USB cable. This is useful for
fastening work in automobile plants and other assembly plants.
PC with Makita Industry Tool Settings installed

1-2. Notes

Please read the following before using this application.
 This application is only for use with Makita products.
 Makita Corporation is not responsible for damage to the user, including direct damage, special damage,
consequential damage, punitive damage, penalties, loss of data, loss of profit and resulting damage, or
fees for procuring a replacement device, resulting from the use of this application.
 The screenshots in this manual may differ from the content displayed on your device.
 No part of this manual may be copied, reproduced, modified, or used in any form.

1-3. Terms of Use

Please review the Terms of Use stored in the "Makita Industry Tool Settings" folder.
24
USB cable