Table 14-10 Receiver Specifications - Teds - Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual

Receiver
Table 14-9 Receiver Specifications – TETRA (Continued)
Receiver Specification
Blocking (static, normal conditions, 4% BER):
50 - 100 kHz
100 - 200 kHz
200 - 500 kHz
>500 kHz
Spurious Responses (normal conditions)
1st Image
1/2 IF
2nd Image
1/2 2nd IF
Intermodulation Response Rejection: Normal conditions
Table 14-10 Receiver Specifications – TEDS
Receiver Specification
Degradation (extreme conditions, static and faded)
Maximum On-channel Desired Power Level
Co-channel Interference (19dB C/I, faded, 16QAM, rate=1/2) TU50:
Adjacent Channel Interference (static, 64QAM, 50kHz, 30dB C/I at -97dBm,
rate = 1/1)
Applicable for both normal and extreme conditions.
Blocking 25kHz TEDS (static, normal conditions, 3% BER):
75 kHz
150 kHz
350 kHz
1, 2, 5, 10 MHz
Blocking 50 kHz TEDS (static, normal conditions, 3% BER):
150 kHz
350 kHz
700 kHz
2, 5, 10 MHz
Spurious Responses (normal conds, QAM4, 25k, static, rate=1/1)
1st Image
1/2 IF
2nd Image
1/2 2nd IF
Intermodulation Response Rejection (normal cond's, QAM4, 25kHz, static,
rate = 1/1)
14-10
Chapter 14: Technical Specifications
Value or Range
-40 dBm
-35 dBm
-30 dBm
-25 dBm
6 max.
70 dB
70 dB
70 dB
70 dB
65 dB
Value or Range
3 dB
-30 dBm
10.0%
3.0%
-40 dBm
-35 dBm
-30 dBm
-25 dBm
-40 dBm
-35 dBm
-30 dBm
-25 dBm
68 dB
68 dB
68 dB
68 dB
66 dB
6802800U74-N September 2009