Casio XJ-450 User Manual page 78

Using the Setup Menu
IImage Adjustment
This sub-menu lets you select the gamma mode for the projected image.
Input Source Specific Menu Items
Input Source
RGB
Component
S-VIDEO
VIDEO
No Signal
Setting Explanations
Standard:
Presentation: Emphasis on clarity to make text easy to read
Theater:
Graphics:
Blackboard: Optimizes color correction for projection onto a blackboard.
Setting Storage
A different setting is stored for each input source.
IImage Adjustment
This sub-menu lets you adjust the color balance of the projected image. There are two
methods you can use to adjust color balance, selecting a preset color temperature value or
adjusting the red, green, or blue components of each color.
Note that you can adjust the color balance either by selecting a color temperature value
or by adjusting color components. You cannot do both.
Color balance settings cannot be configured when there is no input signal.
A different setting can be configured and is stored for each input source.
Adjusting Color Balance by Selecting a Color Temperature Value
You can use the procedure below to adjust color balance by selecting one of three color
temperatures (low, normal, high).
Changing the color temperature of an image alters its whiteness. A lower color temperature
makes whites redder, while a higher color temperature makes them bluer.
1.
On the "Image Adjustment" main menu, select the "Color Balance" sub-
menu item, and then press the [ENTER] key.
This displays the color balance setting screen.
Gamma Mode
Available Items (Parentheses indicate defaults.)
Standard, (Presentation), Theater, Graphics/Blackboard
Standard, Presentation, (Theater), Graphics/Blackboard
None
Standard gamma mode
Emphasis on reproduction of moderate color tones and dark image areas
Emphasis on color gradations and contrast
Color Balance
78