Page 1
CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to loss of data due to malfunction or maintenance of this product, or any other reason.
Page 2
[BLANK] key is pressed (blank screen), and when there is no input signal detected (no signal screen). Note How a user logo can be used depends on your CASIO projector model. See your projector’s User’s Guide for detailed information. To get ready for user logo transfer You will need to prepare the items listed below in order to transfer a user logo to the projector.
Page 3
If you connect first, your computer will not recognize the projector. If this happens, disconnect the USB cable and then perform the procedure below. Visit the CASIO website (page 2) and download USB DRIVER for CASIO Projector to your computer.
Page 4
Using the procedure below to transfer a user logo to a projector will delete any existing logo data currently in projector memory. On the computer you plan to use for user logo transfer, visit the CASIO website (page 2), and download CASIO Projector LOGO Loader and the required header data (both as zip format files).
Page 5
On the “Open File” dialog box that appears, select the applicable logo header data (.cph) and then click [Open]. This will return to the CASIO Projector LOGO Loader window. At this time, check to make sure that “Format: OK” is displayed to the right of “LOGO Header File”.
Page 6
ID-04 Go to the CASIO website and download logo data that is compatible with your projector model, and then perform the procedure under “To transfer a user logo to the projector” again. The logo data was too large to The image file is too large (too many pixels).