Functional Description - Makita LF1000 Instruction Manual

Bench mounting
For the fully-extended feet set up as
the high table
When the tool cannot be set up stable, turn the adjust-
ing nut at the foot of the tool for proper stability. Turn
counterclockwise in top viewing to make the foot shorter
and clockwise in top viewing to make it longer. After
adjustment, make sure that the tool keep stable.
► 1. Adjusting nut 2. Foot
Install the fix plates with its angled end pointing out-
wards onto three feet of the tool with hex bolts. And
secure the tool to the stable and level surface using bolt
holes provided in the fix plates with three bolts.
► 1. Hex. Bolt 2. Fix plate
For the folded feet set up as the low table
► 1. U-shaped grooves
2
1
1
2
1
6 ENGLISH
When the tool is ready in the foot-folded position, secure
the tool by using U-shaped grooves shown in the figure.

FUNCTIONAL DESCRIPTION

CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function
on the tool.
Blade guard
► 1. Lower blade guard A 2. Lower blade guard B
► 1. Lower blade guard C (used in the miter saw
mode only)
2
► 1. Push button 2. Riving knife 3. Top blade guard
(used in the table saw mode)
1
2
1
1
3