Table of Contents
Advertisement
5
Turn the on/off button to "Auto" mode. Then press it to
switch on the appliance�
• The appliance starts sterilizing first. All of the progress
indicator lights flash to show the appliance is sterilizing.
• After that, drying will start automatically� The progress
indicator lights flash and go off gradually to show the
appliance is drying�
• When the whole process is finished, the lights go off and
the appliance switches off automatically.
Caution: The base, the baskets and the lid become hot during
or shortly after operation.
6
Remove the lid�
7
Remove the bottles and other items from the basket� Use the tongs to remove the
smaller items�
Be careful� The sterilized items may still be hot�
Note: Make sure you wash your hands thoroughly before you touch the sterilized
items.
Note: The drying result may vary depending on the ambient temperature, ambient
humidity and loading of sterilizer. You can run one more complete drying cycle if
necessary.
8
Unplug the appliance and wait until the appliance has cooled down completely�
9
Remove the small basket and large basket�
Note: When you remove the large basket, be aware of the remaining water on the
base drip tray.
10
Detach the bottom plate from the large basket� Pour out any remaining water
from the large basket drip tray and clean it (see section "Cleaning")
- 14 -
1
2
Advertisement
Table of Contents
