Honeywell SC1000 Owner's Manual page 90

page 90 008-0608-00
previously entered as
this displacement to the transducer, press [ENTER].
• The display will read
WORKING
viously entered as
KNOWN POINT 4/5
displacement to the transducer, press [ENTER].
• The display will read
WORKING
viously entered as
KNOWN POINT 5/5
displacement to the transducer, press [ENTER].
• Upon completion, the display will indicate
RUN mode.
and
KNOWN POINT 3/5 DISPLAY. UNITS
, then
APPLY 00750 UNIT
and
DISPLAY. UNITS
, then
APPLY 01000 UNIT
and
DISPLAY. UNITS
and the instrument will return to the
DONE
). When you have applied
(where 00750 and UNIT are pre-
). When you have applied this
(where 01000 and UNIT are pre-
). When you have applied this