Table of Contents
Advertisement
Disposing cleaner
A Li-ion battery is built into this cleaner. Always remove
it before disposing of the cleaner.
Removing built-in battery
CAUTION:
•
Do not touch the terminals with any conductive
material.
•
Avoid storing battery unit in a container with
other metal objects such as nails, coins, etc.
•
Do not expose battery unit to water or rain.
•
Do not disassemble or alter battery unit.
•
The cleaner must be disconnected from the
supply mains when removing the battery.
1
► 1. Rear cover
1.
To remove the rear cover, push it in the direction of
the arrow.
► 1. Connector 2. Lead wires
2.
Slide the built-in battery halfway. Disconnect the
lead wires from the battery by slightly moving back
the battery while pressing the connector in the
direction of arrow shown in the figure.
1
2
► 1. Battery unit
3.
Then slide the battery unit completely.
4.
Put the removed battery unit in a carton box so
that it is not circuit-shorted.
Installing replacement battery
To install the replacement battery, follow the removal
procedure in reverse.
CAUTION:
Route the lead so that it is com-
pletely stored inside the cleaner before putting
the rear cover back in the original position. Failure
to do this may damage the lead.
After installing the battery (see "SPECIFICATIONS"),
charge the battery before use.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be per-
formed by Makita Authorized Service Centers, always
using Makita replacement parts.
OPTIONAL ACCESSORIES
CAUTION:
•
These accessories or attachments are recommended
for use with your Makita cleaner specified in this
manual. The use of any other accessories or attach-
ments might present a risk of injury to persons. Only
use accessory or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
11 ENGLISH
1
Advertisement
Table of Contents
