ABB OMD800 Installation And Operating Instruction page 51

A U TO M AT I C C O N T R O L U N I T, O M D 8 0 0
7.2.2.5 Diagnostics
Under Diagnostics are submenus: Measured Values, Alarm/Event Log, Counters, Generator Control,
Test Sequence and Secondary Loads.
Attribute
Measured Values
Alarm / Event Log
Counters
Generator Control
Test Sequence
Secondary Loads
Table 7.11 Diagnostics submenus
Main Menu
System Configuration
Device Configuration
Diagnostics
Figure 7.47 Diagnostics
Measured Values
On these pages the measurement values of main and phase voltages are shown. Measurement value of
frequency is also shown on the both pages.
Diagnostics
Measured Values
Alarm/Event Log
Counters
SW: 2A1 SN: 0
Figure 7.48 Measured Values: Main Voltages with frequency and Phase Voltages with frequency
Alarm/Event log
Under Alarm/Event Log are submenus: View Log and Clear Log.
View log
On this page the latest alarms and events are shown. The number of alarms and events is shown at the
top of the page. The log can contain 50 latest alarms/events at the maximum. The latest alarm/event is
always at the top of the list.
3/3 Diagnostics
Measured Values
Alarm/Event Log
Counters
SW: 2A1
1/6 LN1:
f 0.0 Hz
U
0.0 V
L1-L2
U 0.0 V
L2-L3
U 0.0 V
L3-L1
Return
Value
L-N Voltages
L-L Voltages
View Log
Clear Log
Operations
Generator Started
Generator Stopped
Secondary Loads Connected
Secondary Loads Disconnected
1/6
SN: 0
LN2:
f 0.0 Hz
U 0.0 V
L1-L2
U 0.0 V
L2-L3
U 0.0 V
L3-L1
L-N Voltages
Diagnostics
Generator Control
Test Sequence
Secondary Loads
SW: 2A1 SN: 0
LN2:
LN1:
f 0.0 Hz
f 0.0 Hz
U
U 0.0 V 0.0 V
L1
L1
U 0.0 V
U 0.0 V
L2
L2
U 0.0 V
U 0.0 V
L3 L3
Return
L-L Voltages
51
6/6