ABB OMD800 Installation And Operating Instruction page 49

A U TO M AT I C C O N T R O L U N I T, O M D 8 0 0
Tx/Rx LED indicates data transmission: LED is blinking only when data is transmitted from the
OMD800.
Device Configuration
Auto Switch to 0
LCD Backlight Timer
Modbus
Modbus
Modbus Address
Modbus Baud Rate
Modbus Stop Bits
Modbus
Modbus Address
Modbus Baud Rate
Modbus Stop Bits
Modbus
Modbus Address
Modbus Baud Rate
Modbus Stop Bits
Modbus
Modbus Baud Rate
Modbus Stop Bits
Modbus Parity
Modbus
Modbus Stop Bits
Modbus Parity
Local/Remote
Figure 7.43 Modbus, the factory settings are Modbus address 1, Modbus Baud Rate 9600,
Modbus Stop Bit 1, Modbus Parity None and Modbus Local/Remote Local
10/12
1/5 Modbus Address
Cancel
Modbus Baud Rate
2/5
Cancel
3/5
Modbus Stop Bits
Cancel
4/5
Modbus Parity
Cancel
5/5
Local/Remote
Cancel
1
OK Edit
9600 bps
OK Edit
1 Stop Bit
OK Edit
None
OK Edit
Local
OK Edit
49