SK-FFT Installation and Operation Manual
6.2.8
Zone Active
Each zone has an Active LED (see Figure 6-1). The zone's Active LED will illuminate
when a remote handset is plugged into that zone. The LED will turn off when the
handset is removed from the zone.
6.2.9
Zone Trouble
Each zone has a Trouble LED (see Figure 6-1). The zone's Trouble LED will blink
when specific SLC issues occur such as a missing device or double address.
Pressing the Silence Key will cause the zone trouble LED to be on solid. Once the
zone trouble is corrected, the LED will turn off.
6-4
Active
(green)
Trouble
(amber)
Figure 6-1 LED Operations
Answer
LED
54711