Makita RT001G Instruction Manual page 31

Accessories applicable to this trimmer
The tool can be used with the following accessories for a variety of purposes.
Some accessories are not available in your country.
► Fig.100
1. Trimmer base (metal)
Trimmer base (resin)
2.
Clear visibility of the cut.
Tilt base
3.
4. Offset base
5. Plunge base
6. Grip attachment
7. Templet guide
Straight guide
8.
9. Trimmer guide
10. Trimmer shoe
Enables accurate edge works. *Use with parts of
the trimmer guide.
11. Dust nozzle
12. Base plate (metal)
13. Square base plate (base plate of the tilt base)
14. Offset base plate (base plate of the offset base)
By using the offset base plate with the grip attach-
ment, grip can be attached.
15. Base plate (resin)
16. Grip base
17. Bar type grip
18. Knob type grip (grip of the plunge base)
19. Dust nozzle for the plunge base
20. Templet guide for the plunge base
21. Guide holder
This allows the straight guide for the trimmer base
to be used on the plunge base.
22. Parallel ruler
Fine adjustment function of positioning.
23. Parallel ruler
24. Guide rail adapter
25. Guide rail
For accurate straight cutting.
26. Bevel guide
For angle adjustment of the guide rail.
27. Guide rail joint connector (2 pcs.)
For jointing two guide rails.
28. Clamp (standard type)
For fixation of the guide rail.
29. Clamp (quick type)
For fixation of the guide rail.
30. Seat
Repair parts of the guide rail for upper plastic tape.
31. Rubber seat
Repair parts of the guide rail for lower rubber tape.
32. Position seat
Repair parts of the guide rail for position seat.
► Fig.101
31 ENGLISH