Specifications; Power Supply; Save All Warnings And Instruc- Tions For Future Reference - Makita HR3011FC Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Capacities Concrete
Core bit
Diamond core bit (dry type)
Steel
Wood
No load speed
Blows per minute
Overall length
Net weight
Safety class
Optional accessory
Model:
Applicable workpiece and
workmode
Suction performance
Operating stroke
Suitable drill bit
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s). The lightest and heaviest combination, according to
EPTA-Procedure 01/2014, are shown in the table.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
Waste Electric and Electronic Equipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
HR3011FC
369 mm
4.4 - 4.8 kg
DX10 (For HR3011FC)
for concrete drilling only
(not for metal or wood, and not for core drilling or chiseling)

Power supply

The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
SAFETY WARNINGS
General power tool safety warnings
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
9 ENGLISH
HR3012FC
30 mm
80 mm
80 mm
13 mm
32 mm
-1
0 - 840 min
-1
0 - 4,500 min
386 mm
4.5 - 4.7 kg
/II
DX11 (For HR3012FC)
0.35 l/min
Up to 190 mm
Up to 265 mm
1.2 kg
WARNING:
Read all safety warnings, instruc-
HR3001C
369 mm
4.1 - 4.5 kg