ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Blade diameter
Hole diameter
Max. kerf thickness of the saw blade
Max. miter angle
Max. bevel angle
No load speed (RPM)
Dimensions (L x W x H)
Rated voltage
Net weight
Cutting capacities (H x W)
0°
Thickness of wood
facing on guide fence for
increased height of cut
45° (right and left)
Thickness of wood
facing on guide fence for
increased height of cut
60° (right and left)
Thickness of wood
facing on guide fence for
increased height of cut
Cutting capacities for special cuttings
Type of cutting
Crown molding 45° type
(with crown molding stopper used)
Base board
(with horizontal vise used)
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
European countries
Countries other than Europe
European countries
Countries other than Europe
Miter angle
-
20 mm
38 mm
-
15 mm
25 mm
-
15 mm
25 mm
30 mm or 25.4 mm (country specific)
898 mm x 690 mm x 725 mm
45° (left)
61 mm x 382 mm
71 mm x 363 mm
78 mm x 325 mm
80 mm x 292 mm
61 mm x 268 mm
71 mm x 255 mm
-
-
BL4020 / BL4025 / BL4040* / BL4050F*
* : Recommended battery
DC40RA / DC40RB / DC40RC
19 ENGLISH
LS003G
305 mm
305 mm
30 mm
3.2 mm
Right 60°, Left 60°
Right 48°, Left 48°
-1
3,600 min
D.C. 36 V - 40 V max
30.5 - 31.1 kg
Bevel angle
0°
92 mm x 382 mm
44 mm x 382 mm
107 mm x 363 mm
54 mm x 363 mm
115 mm x 325 mm
61 mm x 325 mm
120 mm x 292 mm
92 mm x 268 mm
44 mm x 268 mm
107 mm x 255 mm
54 mm x 255 mm
115 mm x 227 mm
120 mm x 212 mm
92 mm x 185 mm
107 mm x 178 mm
115 mm x 155 mm
120 mm x 140 mm
Cutting capacity
203 mm
171 mm
45° (right)
-
-
-