Move; Arc3 - Epson RC700 Manual

2.5.3 Move

This section indicates settings in the command advanced setting screen.
01 Move
Robot1.PTS
Point:000
ROT:No
Key operation
OK
Cancel
Motor
Speed
Reset
Guide
F1
F3
F4

2.5.4 Arc3

This section indicates settings in the command advanced setting screen.
01 Arc3
MiddleP:000
EndP
ROT:No
Key operation
OK
Cancel
Motor
Speed
Reset
Guide
F1
F2
F3
F4
RC700 / RC90 option TP2 Rev.11
L ■
ECP:No
Description
Fixes the parameter setting and displays the execution
confirmation screen.
Returns to the motion command selection screen.
Turns ON / OFF the motor.
Switches the speed (Low / High).
Sets the initial setup status.
Displays the key operation guide.
Switches to the point number input mode.
ROT: Switches between Enabled (Yes) and Disenabled (No).
(Available when the ECP option is enabled.)
ECP: Switches between Enabled (Yes) / Disenabled (No).
L ■
:000
ECP:No
Description
Fixes the parameter setting and displays the execution
confirmation screen.
Returns to the motion command selection screen.
Turns ON / OFF the motor.
Switches the speed (Low / High).
Sets the initial setup status.
Displays the key operation guide.
MiddleP: Switches to the Middle Point number input mode.
EndP: Switches to the End Point number input mode.
ROT: Switches between Enabled (Yes) and Disenabled (No).
ECP: Switches between Enabled (Yes) and Disenabled (No).
Operation
2. TEACH Mode
79