(3) Press the <OK> key to load the point data in the file memory.
(4) Select if you save the point file.
TIP
This can also be executed in the [Point Editor] screen.
2.1.18 Changing the Robot
You can change the robot to execute Jog & Teach.
For details, refer to Operation 2.8 Robot.
RC700 / RC90 option TP2 Rev.11
When there is some change in the point file, the following screen appears. <OK>
01 LoadPoints
Change were made to
Robot1.PTS
Save?
<OK>
: Saves the change and loads the point file.
<Cancel> : Does not save the change and loads the point file.
Operation
2. TEACH Mode
43