Table of Contents
Advertisement
DAP-1360U Wireless N300 Access Point & Router
User Manual
In order to connect your device to a wired ISP, on the Device mode page, from the Connection
method list, select the Wired connection value. Then from the Work mode list select the
Router value. In this mode you can configure a WAN connection, set your own settings for the
wireless network, configure LAN ports to connect an STB or VoIP phone, and set your own
password for access to the web-based interface of the device.
In order to connect your device to a wireless ISP (WISP), on the Device mode page, from the
Connection method list, select the Wi-Fi value. Then from the Work mode list select the
WISP Repeater value. In this mode you can connect your device to another access point,
configure a WAN connection, set your own settings for the wireless network, configure LAN ports
to connect an STB or VoIP phone, and set your own password for access to the web-based interface
of the device.
Figure 28. Selecting an operation mode. The WISP Repeater mode.
When the operation mode is selected, click the NEXT button.
Figure 27. Selecting an operation mode. The Router mode.
Page 34 of 158
Configuring via Web-based Interface
Advertisement
Table of Contents
