Table of Contents
Advertisement
DAP-1360U Wireless N300 Access Point & Router
User Manual
If needed, you can add your own address resource record. To do this, click the ADD button (
the Hosts section.
In the IP address field, specify a host from the internal or external network. You can choose a
device connected to the access point's LAN at the moment. To do this, select the relevant IP address
from the drop-down list (the field will be filled in automatically). In the Name field, specify the
domain name to which the specified IP address will correspond. Click the SAVE button.
To edit an existing record, in the Hosts section, select the relevant line in the table. In the opened
window, change the needed parameters and click the SAVE button.
To remove a record, in the Hosts section, select the checkbox located to the left of the relevant line
in the table and click the DELETE button (
After completing the work with records, click the APPLY button.
Figure 89. The window for adding a DNS record.
).
Page 113 of 158
Configuring via Web-based Interface
) in
Advertisement
Table of Contents
