DAP-1360U Wireless N300 Access Point & Router
User Manual
System
In this menu you can do the following:
change the password used to access the access point's settings
•
restore the factory default settings
•
create a backup of the access point's configuration
•
restore the access point's configuration from a previously saved file
•
save the current settings to the non-volatile memory
•
reboot the access point
•
change the web-based interface language
•
update the firmware of the access point
•
configure automatic notification on new firmware version
•
view the system log; configure sending the system log to a remote host
•
check availability of a host on the Internet through the web-based interface of the access
•
point
trace the route to a host
•
allow or forbid access to the access point via TELNET
•
configure automatic synchronization of the system time or manually configure the date and
•
time for the access point.
Page 140 of 158
Configuring via Web-based Interface