Table of Contents
Advertisement
DAP-1360U Wireless N300 Access Point & Router
User Manual
You can specify the following parameters:
Parameter
Name
Template
Interface
Protocol
NAT Loopback
Remote IP
Public port (start)/
Public port (end)
Private IP
General Settings
A name for the virtual server for easier identification. You can
specify any name.
Select a virtual server template from the drop-down list, or select
Custom to specify all parameters of the new virtual server
manually.
A WAN connection to which this virtual server will be assigned.
A protocol that will be used by the new virtual server. Select a value
from the drop-down list.
Move the switch to the right in order to let the users of the access
point's LAN access the local server using the external IP address of
the access point or its DDNS name (if a DDNS service is
configured). Users from the external network access the access point
using the same address (or DDNS name).
Public Network Settings
Enter the IP address of the server from the external network.
To add one more IP address, click the ADD REMOTE IP button and
enter the address in the displayed line.
To remove the IP address, click the Delete icon ( ) in the line of
the address.
A port of the access point from which traffic is directed to the IP
address specified in the Private IP field in the Private Network
Settings section. Specify the start and the end value for the port
range. If you need to specify one port, enter the needed value in the
Public port (start) field and leave the Public port (end) field
blank.
Private Network Settings
The IP address of the server from the local area network. To choose
a device connected to the access point's LAN at the moment, select
the relevant value from the drop-down list (the field will be filled in
automatically).
Page 133 of 158
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
