Table of Contents
Advertisement
Quick Links
Advertisement
Chapters
Table of Contents
Related Manuals for D-Link 0790069323058
Summary of Contents for D-Link 0790069323058
- Page 1 Wireless N Open Source Access Point...
-
Page 2: Table Of Contents
Wireless Setup Wizard ...............22 Advanced Network (WISP modes only) ......56 Access Point Mode .............23 Maintenance ................57 Repeater Mode ..............26 Admin ..................57 Wireless Client Mode ............30 System ..................58 Manual Configuration ...............34 Language Pack ..............59 Wireless Settings ..............34 D-Link DAP-1360 User Manual... - Page 3 Configure WPA/WPA2 Personal ..........72 Configure WPA/WPA2 Enterprise ..........73 Connect to a Wireless Network ........74 Using Windows XP ..............74 ® Configure WPA-PSK ..............75 Using Windows Vista ...............77 ® Configure WPA-PSK ..............79 Using Windows 7 ...............80 ® Configure WPS ..............83 D-Link DAP-1360 User Manual...
-
Page 4: Package Contents
Ethernet Cable Two Detachable Antennas Power Adapter CD-ROM with Manual Note: Using a power supply with a different voltage rating than the one included with the DAP-1360 will cause damage and void the warranty for this product. D-Link DAP-1360 User Manual... -
Page 5: System Requirements
• An installed Ethernet adapter Browser Requirements: Web-based Configuration • Internet Explorer® 6.0 and higher Utility Requirements • Mozilla Firefox 3.0 and higher • Google™ Chrome 2.0 and higher • Apple Safari 3.0 and higher Windows Users: Make sure you have the latest version of Java installed. ® Visit www.java.com to download the latest version. D-Link DAP-1360 User Manual... -
Page 6: Introduction
The DAP-1360 supports WPS on the AP, repeater and wireless client operation modes,with each capable of being conveniently set up by using the PIN method or Push Button. • Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. D-Link DAP-1360 User Manual... - Page 7 ULTIMATE PERFORMANCE The D-Link Wireless N Open Source Access Point (DAP-1360) is an 802.11n compliant device that delivers real world performance of up to 13X faster than an 802.11g wireless connection (also faster than a 100Mbps wired Ethernet connection). Create a secure wireless network to share photos, files, music, video, printers, and network storage throughout your home. Connect the DAP-1360 to router and...
-
Page 8: Features
• WPS PIN - (Wi-Fi Protected Setup Personal Identification Number ) A PIN is a unique number that can be used to add the access point to an existing network or to create a new network. The default PIN may be printed on the bottom of the access point. For extra security, a new PIN can be generated. You can restore the default PIN at any time. Only the Administrator (“admin” account) can change or reset the PIN. • User-friendly Setup Wizard - Through its easy-to-use Web-based user interface, the DAP-1360 lets you control what information is accessible to those on the wireless network, whether from the Internet or from your company’s server. Configure your access point to your specific settings within minutes. D-Link DAP-1360 User Manual... -
Page 9: Hardware Overview
Section 1 - Product Overview Hardware Overview Connections LAN Port Connect 10/100 Ethernet devices such as computers, switches, and hubs. Power Receptor Receptor for the supplied power adapter. Reset Button Pressing the Reset Button restores the access point to its original factory default settings. D-Link DAP-1360 User Manual... -
Page 10: Leds
A solid green light indicates the wireless function is working. The light will be off during Wireless LED device reboot or if the wireless radio is disabled. Security LED A solid green light indicates that wireless security (WEP, WPA, WPA2) is enabled. LAN LED A solid green light indicates the LAN port connection is OK. D-Link DAP-1360 User Manual... -
Page 11: Wps Led/Button
Section 1 - Product Overview Hardware Overview WPS LED/Button A solid light indicates a successful WPS connection. A blinking light indicates the WPS LED/Button device is trying to establish a connection. D-Link DAP-1360 User Manual... -
Page 12: Installation
Depending on how you want to use your DAP-1360 will determine which mode you use. This section will help you figure out which setting works with your setup. • Access Point mode - page 13 • Wireless Client mode - page 14 • Repeater mode - page 15 • Bridge mode - page 16 • Bridge with AP mode - page 17 • WISP Client Router mode - page 18 • WISP Repeater mode - page 19 D-Link DAP-1360 User Manual... -
Page 13: Access Point Mode
Section 2 - Installation Access Point Mode In the Access Point mode, the DAP-1360 acts as a central connection point for any computer (client) that has a 802.11n or backward-compatible 802.11g wireless network interface and is within range of the AP. Clients must use the same SSID (wireless network name) and channel as the AP in order to connect. If wireless security is enabled on the AP, the client will need to enter a password to connect to the AP. In Access Point mode, multiple clients can connect to the AP at the same time. Computer Internet Modem Router DAP-1360 (in Access Point Mode) Computer D-Link DAP-1360 User Manual... -
Page 14: Wireless Client Mode
Example: Connect a gaming console using an ethernet cable to the DAP-1360. The unit is set to Wireless Client mode which will wirelessly connect to a wireless router on your network. Gaming Console Internet Modem Router DAP-1360 (in Wireless Client Mode) D-Link DAP-1360 User Manual... -
Page 15: Repeater Mode
Section 2 - Installation Repeater Mode In Repeater mode, the DAP-1360 increases the range of your wireless network by extending the wireless coverage of another AP or wireless router. The APs and wireless router (if used) must be within range of each other. Make sure that all clients, APs, and the wireless router all use the same SSID (wireless network name), channel, and security settings. Computer Computer Internet Modem Router DAP-1360 (In Repeater Mode) Computer D-Link DAP-1360 User Manual... -
Page 16: Bridge Mode
Note: The Bridge mode is not specified in the Wi-Fi or IEEE standards. This mode will only work using two DAP-1360 units. Communication with other APs (even other D-Link APs) is not guaranteed. Connecting Two Separate LANs Together Through Two DAP-1360 Units... -
Page 17: Bridge With Ap Mode
DAP-1360 and then connect to the other LAN that the DAP-1360 bridges to. Note: The Bridge with AP mode is not specified in the Wi-Fi or IEEE standards. This mode will only work using two DAP-1360 units. Communication with other APs (even other D-Link APs) is not guaranteed. LAN 1... -
Page 18: Wisp Client Router Mode
DHCP server to generate IP addresses for wired clients only. NAT and the DHCP server allow many computers to share the same wireless Internet connection. If you are a WISP subscriber and want to access your WISP account using wired computers, connect your computers to the DAP-1360 to get NAT, and then connect them to the WISP AP. Computer DAP-1360 Internet WISP Outdoor AP (In WISP Client Mode) Connecting Wired PCs to the Internet Using the DAP-1360 D-Link DAP-1360 User Manual... -
Page 19: Wisp Repeater Mode
DHCP server allow many computers to share the same wireless Internet connection. If you are a WISP subscriber and want to use your WISP account in your house, but the signals from the outdoor WISP AP are not strong enough to reach all of the areas in the house, use the DAP-1360 to can extend the signals from the outdoor WISP AP and provide access to wireless clients in your house. Using this mode, wireless as well as wired clients can connect to the outdoor WISP AP through the DAP-1360. Computer Computer Internet Modem Router DAP-1360 (In Repeater Mode) Computer Connecting Wired and Wireless PCs to the Internet Using the DAP-1360 D-Link DAP-1360 User Manual... -
Page 20: Wireless Installation Considerations
1. Keep the number of walls and ceilings between the D-Link access point and other network devices to a minimum. Each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. -
Page 21: Configuration
Section 3 - Configuration Configuration This section will show you how to configure your new D-Link wireless access point using the web-based configuration utility. Web-based Configuration Utility If you wish to change the default settings or optimize the performance of the DAP-1360, you may use the web-based configuration utility. -
Page 22: Wireless Setup Wizard
Section 3 - Configuration Wireless Setup Wizard Click Launch Wireless Setup Wizard to configure your access point. If you want to enter your settings without running the wizard, skip to page 34. Click Next to continue. D-Link DAP-1360 User Manual... -
Page 23: Access Point Mode
This Wizard is designed to assist you in configuring your DAP-1360 as an access point. Select Access Point from the drop-down menu. Then, click Next to continue. Select WPS as the configuration method only if your wireless device supports Wi-Fi Protected Setup (WPS). For Manual setup, skip to page 25. Click Next to continue. D-Link DAP-1360 User Manual... - Page 24 Click Save to save your network settings. In order for your network settings to take effect AP will reboot automatically. When the device has finished rebooting the main screen will display. D-Link DAP-1360 User Manual...
- Page 25 Enter your network key. This key must be entered on your wireless clients. Click Next to continue. The following screen will show you your network key to enter on your wireless clients. Click Save to finish the Setup Wizard. D-Link DAP-1360 User Manual...
-
Page 26: Repeater Mode
Select WPS as the configuration method only if your wireless device supports Wi-Fi Protected Setup (WPS). For Manual setup, skip to the next page. Click Next to continue. On the device you want to connect to, start the PBC process on the device. You will have 2 minutes to start the PBC process on both devices. D-Link DAP-1360 User Manual... - Page 27 Section 3 - Configuration Select Manual configuration to setup your network manually. Click Next to continue. Find your router or access point from the list, click the radio button in the right column, and click Connect. If click Key in SSID, enter the network name (SSID) of the network you want to connect to. D-Link DAP-1360 User Manual...
- Page 28 Choose which Security Mode you want to use and click Next to continue. If you select WEP, choose the key type (ASCII or HEX), the key size (64 or 128-bit), and enter the wireless security password. Click Next to complete the Setup Wizard. If you select WPA or WPA2, enter the wireless security password. Click Next to complete the Setup Wizard. D-Link DAP-1360 User Manual...
- Page 29 Section 3 - Configuration If you select Auto, enter the wireless security password. Click Next to complete the Setup Wizard. The Wireless Setup Wizard is complete. Click Finish to reboot the device. D-Link DAP-1360 User Manual...
-
Page 30: Wireless Client Mode
Select WPS as the configuration method only if your wireless device supports Wi-Fi Protected Setup (WPS). For Manual setup, skip to the next page. Click Next to continue. On the device you want to connect to, start the PBC process on the device. You will have 2 minutes to start the PBC process on both devices. D-Link DAP-1360 User Manual... - Page 31 Section 3 - Configuration Select Manual configuration to setup your network manually. Click Next to continue. Find your access point from the list, click the radio button in the right column, and click Connect. If click Key in SSID, enter the network name (SSID) of the network you want to connect to. D-Link DAP-1360 User Manual...
- Page 32 Choose which Security Mode you want to use and click Next to continue. If you select WEP, choose the key type (ASCII or HEX), the key size (64 or 128-bit), and enter the wireless security password. Click Next to complete the Setup Wizard. If you select WPA or WPA2, enter the wireless security password. Click Next to complete the Setup Wizard. D-Link DAP-1360 User Manual...
- Page 33 Section 3 - Configuration If you select Auto, enter the wireless security password. Click Next to complete the Setup Wizard. The Wireless Setup Wizard is complete. Click Finish to reboot the device. D-Link DAP-1360 User Manual...
-
Page 34: Manual Configuration
Section 3 - Configuration Manual Configuration Wireless Settings You may manually configure your DAP-1360 instead of running the setup wizard. • Access Point mode - page 35 • Repeater mode - page 37 • Wireless Client mode - page 38 • Bridge mode - page 39 • Bridge with AP mode - page 40 • WISP Client Router mode - page 41 • WISP Repeater mode - page 41 D-Link DAP-1360 User Manual... -
Page 35: Access Point Mode
Mixed 802.11n, 802.11g and 802.11b - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients. Wireless Indicates the channel setting for the DAP-1360. The Channel can be changed to fit the channel setting for an existing wireless network Channel: or to customize the wireless network. If you enable Auto Channel Scan, this option will be grayed out. Enable Auto The Auto Channel Scan setting can be selected to allow the DAP-1360 to choose the channel with the least amount of interference. Channel Scan: D-Link DAP-1360 User Manual... - Page 36 DAP-1360 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DAP-1360 in order to connect to it. Security Mode: Refer to page 65 for more information regarding the wireless security. D-Link DAP-1360 User Manual...
-
Page 37: Repeater Mode
Select the appropriate channel width between 20MHz or Auto 20/40MHz from the drop-down menu. Visibility Status: Check the box if you do not want the SSID to be broadcast by the DAP-1360. This prevents the SSID from being seen by site survey utilities, so any wireless clients will have to be pre-configured with the SSID of the DAP-1360 in order to connect to it. Wireless Security Select a wireless security setting. Options are None, WEP, WPA, or WPA2. See the Wireless Security section in this manual for a detailed Mode: explanation of the wireless security options. D-Link DAP-1360 User Manual... -
Page 38: Wireless Client Mode
Wireless Security Select a wireless security setting. Options are None, WEP, WPA, or WPA2. See the Wireless Security section in this manual for a detailed Mode: explanation of the wireless security options. WPS: Select enable if you want to configure the DAP-1360 with Wi-Fi Protection setup. D-Link DAP-1360 User Manual... -
Page 39: Bridge Mode
(No RADIUS server required). Note: The Bridge mode is not completely specified in the Wi-Fi or IEEE standards. This mode can work with other DAP-1360 units. Communication with other APs (even other D-Link APs) is not guaranteed. D-Link DAP-1360 User Manual... -
Page 40: Bridge With Ap Mode
(No RADIUS server required). Note: The Bridge with AP mode is not completely specified in the Wi-Fi or IEEE standards. This mode can work with other DAP-1360 units. Communication with other APs (even other D-Link APs) is not guaranteed. D-Link DAP-1360 User Manual... -
Page 41: Wisp Client Router/Wisp Repeater Modes
The Auto Channel Scan setting can be selected to allow the DAP-1360 to choose the channel with the least amount of interference. Channel Width: Select the appropriate channel width between 20MHz or Auto 20/40MHz from the drop-down menu. Visibility Status: Check the box if you do not want the SSID to be broadcast by the DAP-1360. This prevents the SSID from being seen by site survey utilities, so any wireless clients will have to be pre-configured with the SSID of the DAP-1360 in order to connect to it. Wireless Security Select a wireless security setting. Options are None, WEP, WPA, or WPA2. Refer to the Wireless Security section of this manual for Mode: a detailed explanation of the wireless security options. D-Link DAP-1360 User Manual... -
Page 42: Wan Settings
AP’s MAC address with the MAC address of the PC that you used to register with your ISP. It is not recommended that you change the default MAC address unless required by your ISP. D-Link DAP-1360 User Manual... -
Page 43: Static Ip
Enter the Secondary DNS (optional) server IP address assigned by your ISP. Clone MAC Address: The default MAC address is set to the MAC address on the AP (Access Point). You can click the Clone Your PC’s MAC Address button to replace the AP’s MAC address with the MAC address of your Ethernet card. It is not recommended that you change the default MAC address unless required by your ISP. D-Link DAP-1360 User Manual... -
Page 44: Pppoe
The default MAC address is set to the MAC address on the AP (Access Point). You can click the Clone Your PC’s MAC Address button to replace the AP’s MAC address with the MAC address of your Ethernet card. It is not recommended that you change the default MAC address unless required by your ISP. D-Link DAP-1360 User Manual... -
Page 45: Pptp
The default MAC address is set to the MAC address on the AP (Access Point). You can click the Clone Your PC’s MAC Address Clone MAC Address: button to replace the AP’s MAC address with the MAC address of your Ethernet card. It is not recommended that you change the default MAC address unless required by your ISP. D-Link DAP-1360 User Manual... -
Page 46: Lan Settings
This section will allow you to change the local network settings of the access point and to configure the DHCP settings. Device Name: Enter the Device Name of the AP. It is recommended to change the Device Name if there is more than one D-Link device within the subnet. LAN Connection Use the drop-down menu to select Dynamic IP Type: (DHCP) to automatically obtain an IP address on the LAN/private network. -
Page 47: Static Ip
Device Name: Enter the Device Name of the AP. It is recommended to change the Device Name if there is more than one D-Link device within the subnet. You can enter the device name of the AP into your web browser to access the instead of IP address for configuration. If you are using the device name to connect, ensure that your PC and your DAP-1360 are on the same network. -
Page 48: Advanced
WLAN Partition: This feature enables client isolation. If enabling, all clients will not be able to view or access each other’s information or within the network. HT 20/40 Check to enable or disable this feature. Coexistance: D-Link DAP-1360 User Manual... -
Page 49: Mac Address Filter
This parameter allows you to manually add a MAC filtering Filtering rule. Click the Add button to add the new MAC filtering rule Rule: to the MAC Filtering Rules list at the bottom of this screen. D-Link DAP-1360 User Manual... -
Page 50: Wi-Fi Protected Setup
Generate New Create a random number that is a valid PIN. This PIN: becomes the router’s PIN. You can then copy this PIN to the user interface of the registrar. Add Wireless Press the button to start with the wizard to setup Station: the WPS. D-Link DAP-1360 User Manual... -
Page 51: User Limits
Section 3 - Configuration User Limits Enter the maximum number of wireless clients that can connect at one time to your access point. Enable User Check the Enable User Limit box to enable this Limit: feature. User Limit: Enter the maximum number of clients, between 1 and 32. Save Click Save Settings to save and activate the new Settings: changes. D-Link DAP-1360 User Manual... -
Page 52: Port Forwarding (Wisp Modes Only)
Enter the IP address of the computer on your local network that you want to allow the incoming service to. Start/End Ports: Enter the port or ports that you want to open. If you want to open one port, enter the same port in both boxes. Traffic Type: Select TCP, UDP, or Both. D-Link DAP-1360 User Manual... -
Page 53: Port Filter (Wisp Modes Only)
Click the << button to fill in the Name field with the application name that you selected. Start/End Ports: Enter the port or ports that you want to open. If you want to open one port, enter the same port in both boxes. Traffic Type: Select TCP, UDP, or Both. D-Link DAP-1360 User Manual... -
Page 54: Dmz (Wisp Modes Only)
Check this box to enable DMZ. DMZ Host IP Enter the IP address of the computer you would Address: like to open all ports to. You can select a computer from the Computer Name drop-down menu and click << to enter the computer name into the DMZ Host IP Address field. D-Link DAP-1360 User Manual... -
Page 55: Parental Control (Wisp Modes Only)
Filtering ON and DENY computers access to Filtering Below: ONLY these sites. Website URL Enter a keyword or URL that you want to block Address: and click Save Settings. Any URL that contains the keyword will be blocked. D-Link DAP-1360 User Manual... -
Page 56: Advanced Network (Wisp Modes Only)
Administrator tasks. This feature enables you to perform Administrator tasks from the remote (Internet) host. D-Link DAP-1360 User Manual... -
Page 57: Maintenance
Enter a new password for the Administrator Login Name. The administrator can make changes to the settings. Confirm Enter the same password that you entered in the Password: previous textbox in order to confirm its accuracy. Enable Check to enable this feature. Graphical Authentication: D-Link DAP-1360 User Manual... -
Page 58: System
If you want to save the current access point configuration settings, use the Save button above. Note: Restoring the factory default settings will not reset the Wi-Fi Protected Status to Not Configured. Reboot the Click to reboot the access point. Device: D-Link DAP-1360 User Manual... -
Page 59: Language Pack
Section 3 - Configuration Firmware You can upgrade the firmware of the access point here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support website for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from this site. Firmware Click on Check Now to find out if there is an updated Upgrade: firmware; if so, download the new firmware to your... -
Page 60: Watchdog
Enter the e-mail address from which the notification will be sent. Receiver E-Mail: Enter the e-mail address which the notification will be sent to. Enable Check the box to enable authentication that is used with the SMTP server. Authentication: Account Name: Enter your account name that is used with the SMTP server. Password: Enter your password that is used with the SMTP server and re-enter it in the next box. D-Link DAP-1360 User Manual... -
Page 61: Time
Date and Time: To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second and then click Save Settings. You can also click the Copy Your Computer’s Time Settings button at the bottom of the screen. D-Link DAP-1360 User Manual... -
Page 62: System Check
The Ping Test / IPv6 Ping Test is used to send Ping IPv6 Ping Test: packets to test if a computer is on the Internet. Enter the host name or IP/IPv6 address that you wish to Ping, and click Ping. Ping Result: The results of your ping attempts will be displayed here. D-Link DAP-1360 User Manual... -
Page 63: Schedules
Enter a start and end time for your schedule. Schedule Rules The list of schedules will be listed here. Click the List: Edit icon to make changes or click the Delete icon to remove the schedule. D-Link DAP-1360 User Manual... -
Page 64: Status
Displays the access point’s time and firmware version. LAN: Displays the MAC address and the private (local) IP settings for the access point. Wireless LAN: Displays the wireless MAC address and your wireless settings such as SSID and Channel. D-Link DAP-1360 User Manual... -
Page 65: Logs
This button directs you to the previous page of the log. Next Page: This button directs you to the next page of the log. Clear Log: This button clears all current log content. Log Settings: This button opens a new menu where you can configure the log settings. Refresh: This button refreshes the log. D-Link DAP-1360 User Manual... -
Page 66: Statistics
Section 3 - Configuration Statistics The DAP-1360 keeps statistics of the traffic that passes through it. You can view the amount of packets that pass through the LAN and wireless portions of the network. The traffic counter will reset if the access point is rebooted. D-Link DAP-1360 User Manual... -
Page 67: Wireless
The wireless section allows you to view the wireless clients that are connected to your wireless access point. Connection Time: Displays the amount of time the wireless client has been connected to the access point. MAC Address: The Ethernet ID (MAC address) of the wireless client. D-Link DAP-1360 User Manual... -
Page 68: Ipv6
Section 3 - Configuration IPv6 This page displays all your IPv6 internet and network connection information. D-Link DAP-1360 User Manual... -
Page 69: Help
Section 3 - Configuration Help D-Link DAP-1360 User Manual... -
Page 70: Wireless Security
Section 4 - Security Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DAP-1360 offers the following types of security: • WPA2 (Wi-Fi Protected Access 2) • WPA2-PSK (Pre-Shared Key) • WPA (Wi-Fi Protected Access) • WPA-PSK (Pre-Shared Key) D-Link DAP-1360 User Manual... -
Page 71: What Is Wpa
WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless bridge or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DAP-1360 User Manual... -
Page 72: Configure Wpa/Wpa2 Personal
4. Next to PSK / EAP, select Personal. 5. Next to Passphrase, enter a key. The key is entered as a passphrase in ASCII format at both ends of the wireless connection. The passphrase must be between 8-63 characters. 6. Click Save Settings at the top of the window to save your settings. If you are configuring the access point with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the access point. D-Link DAP-1360 User Manual... -
Page 73: Configure Wpa/Wpa2 Enterprise
Setup and then click Wireless Settings on the left side. 2. Next to Security Mode, select Enable WPA Wireless Security, Enable WPA2 Wireless Security, or Enable WPA2-Auto Wireless Security. 3. Next to Cipher Mode, select TKIP, AES, or Auto. 4. Next to Personal / Enterprise, select Enterprise. 5. Next to RADIUS Server, enter the IP Address of your RADIUS server. 6. Next to Port, enter the port you are using with your RADIUS server. 1812 is the default port. 7. Next to Shared Secret, enter the security key. 8. Click Save Settings to save your settings. D-Link DAP-1360 User Manual... -
Page 74: Connect To A Wireless Network
The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal, but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DAP-1360 User Manual... -
Page 75: Configure Wpa-Psk
XP Wireless Utility by right-clicking ® on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DAP-1360 User Manual... - Page 76 Section 5 - Connecting to a Wireless Network 3. The Wireless Network Connection box will appear. Enter the WPA-PSK passphrase and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless access point. D-Link DAP-1360 User Manual...
-
Page 77: Using Windows Vista
Network and Sharing Center. The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) under Select a network to connect to and then click the Connect button. D-Link DAP-1360 User Manual... - Page 78 Click Connect Anyway to continue. The utility will display the following window to indicate a connection is being made. The final window indicates the establishment of a successful connection. The next two pages display the windows used to connect to either a WEP or a WPA-PSK wireless network. D-Link DAP-1360 User Manual...
-
Page 79: Configure Wpa-Psk
Click on a network (displayed using the SSID) using WPA-PSK under Select a network to connect to and then click the Connect button. Enter the appropriate security key or passphrase in the field provided and then click the Connect button. D-Link DAP-1360 User Manual... -
Page 80: Using Windows ® 7
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). Wireless Icon 2. The utility will display any available wireless networks in your area. D-Link DAP-1360 User Manual... - Page 81 Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DAP-1360 User Manual...
- Page 82 5. Enter the same security key or passphrase that is on your router and click Connect. You can also connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DAP-1360 User Manual...
-
Page 83: Configure Wps
7. Carry out the following steps to use Windows 7 to ® ® configure the WPS feature of the DAP-1360: 1. Click the Start button and select Computer from the Start menu. 2. Click the Network option. D-Link DAP-1360 User Manual... - Page 84 3. Double-click the DAP-1360. 4. Input the WPS PIN number (displayed in the WPS window on the Router’s LCD screen or in the Setup > Wireless Setup menu in the Router’s Web UI) and click Next. D-Link DAP-1360 User Manual...
- Page 85 Section 5 - Connecting to a Wireless Network 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DAP-1360 User Manual...
- Page 86 Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DAP-1360 User Manual...
-
Page 87: Troubleshooting
- Apple Safari 3.0 and higher • Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on. • Disable any internet security software running on the computer. Software firewalls such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, and Windows XP firewall may block access to the configuration pages. Check the help files included ® with your firewall software for more information on disabling or configuring it. D-Link DAP-1360 User Manual... - Page 88 2. What can I do if I forgot my password? If you forgot your password, you must reset your access point. Unfortunately this process will change all your settings back to the factory defaults. To reset the access point, locate the reset button (hole) on the rear panel of the unit. With the access point powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the access point will go through its reboot process. Wait about 30 seconds to access the access point. The default IP address is 192.168.0.50. When logging in, the username is Admin and leave the password box empty. D-Link DAP-1360 User Manual...
- Page 89 Note: AOL DSL+ users must use MTU of 1400. To find the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination could be another computer, or a URL. • Click on Start and then click Run. • Windows 95, 98, and Me users type in command (Windows NT, 2000, and XP users type in cmd) and press Enter ® ® (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f ] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DAP-1360 User Manual...
- Page 90 To change the MTU rate on your access point follow the steps below: • Open your browser, enter the IP address of your access point (192.168.0.50) and click OK. • Enter your username (Admin) and password (blank by default). Click OK to enter the web configuration page for the device. • Click on Setup and then click Manual Configure. • To change the MTU enter the number in the MTU field and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DAP-1360 User Manual...
-
Page 91: Wireless Basics
Appendix A - Wireless Basics Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers. A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops... -
Page 92: What Is Wireless
Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or office. D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How does wireless work? Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area... - Page 93 Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away. Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries. Who uses wireless? Wireless technology has become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home • Gives everyone at home broadband access • Surf the web, check email, instant message, etc. • Gets rid of the cables around the house • Simple and easy to use Small Office and Home Office • Stay on top of everything at home as you would at office • Remotely access your office network from home • Share Internet connection and printer with multiple computers • No need to dedicate office space D-Link DAP-1360 User Manual...
-
Page 94: Tips
Make sure you place the bridge/access point in a centralized location within your network for the best performance. Try to place the bridge/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range. Eliminate Interference Place home appliances such as cordless telephones, microwaves, wireless speakers, and televisions as far away as possible from the bridge/access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. D-Link DAP-1360 User Manual... -
Page 95: Wireless Modes
WPA or WEP security feature on the access point. Refer to product manual for detail information on how to set it up. Wireless Modes There are basically two modes of networking: • Infrastructure – All wireless clients will connect to an access point or wireless bridge. • Ad-Hoc – Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer, such as two or more wireless network Cardbus adapters. An Infrastructure network contains an Access Point or wireless bridge. All the wireless devices, or clients, will connect to the wireless bridge or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DAP-1360 User Manual... -
Page 96: Networking Basics
Click on Start > Run. In the run box type cmd and click OK. (Windows® 7/Vista® users type cmd in the Start Search box.) At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DAP-1360 User Manual... -
Page 97: Statically Assign An Ip Address
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DAP-1360 User Manual... -
Page 98: Technical Specifications
• 90% maximum (non-condensing) • 11Mbps • 9Mbps Safety & Emissions • 6Mbps • 5.5Mbps • 2Mbps • 1Mbps • FCC • IC • CE • C-Tick Maximum Operating Voltage • 5V 1A Dimensions • 144 (W) x 109 (D) x 30 (H) mm (5.67 x 4.29 x 1.18 inches) Maximum Operating Current • 450 mA Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. Range varies depending on country’s regulation. D-Link DAP-1360 User Manual... - Page 99 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. D-Link DAP-1360 User Manual...
- Page 100 (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter (IC: 4216A-AP1360C1 / Model: DAP-1360C1) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. D-Link DAP-1360 User Manual...
- Page 101 NOTE IMPORTANTE: Déclaration d’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Ce dispositif a été conçu pour fonctionner avec une antenne ayant un gain maximal de dB [2]. Une antenne à gain plus élevé est strictement interdite par les règlements d’Industrie Canada. L’impédance d’antenne requise est de 50 ohms. Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peutfonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pourl’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectriqueà l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que lapuissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l’intensité nécessaire àl’établissement d’une communication satisfaisante. Le présent émetteur radio (IC: 4216A-AP1360C1 / Model: DAP-1360C1) a été approuvé par Industrie Canada pour fonctionner avec les types d’antenne énumérés ci-dessous et ayant un gain admissible maximal et l’impédance requise pour chaque type d’antenne. Les types d’antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l’exploitation de l’émetteur. Antenna information: dipole / 2dBi (Brand:D-Link / Manufacturer :WHA YU) D-Link DAP-1360 User Manual...