Ubox Labels - Hitachi DS7000 Installation Manual

1.3.2.

UBox Labels

Identification label for the UBox
The label is located on the side of the server.
A
B
C
D
E
F
W071
W071:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received including
interference that may cause undesired operation
1-6 Installation Guide
Mark
Recycling symbol: it is mandatory to reuse and recycle
electronic and electrical equipment properly
Electric hazard symbol: Caution! Risk of electric shock
Multiple power sources symbol: Caution! The system has
more than one power source which must all be disconnected
before servicing to avoid shock hazard
ProtectivE conductor symbol: Caution! The system has a high
protective conductor current. The protective conductor (PE)
should be connected first to main protective earthing
terminal before connecting the line and neutral to avoid
shock hazard, and a PE connection to the main PE terminal is
essential before connecting the mains to avoid electric shock
Altitude symbol: the system must not be operated at an
altitude higher than 2000 meters
Tropicalization symbol: the system must be operated within
the adequate limits of temperature and humidity
WARNING
Description