Relocating The Machine; Required Articles; Preparation For Relocating The Machine; Work Procedure - Canon imageRUNNER 2545 Series Service Manual

Relocating the Machine

Required Articles

Have the following articles on hand:
Fixing tape
Drum cover removed during installation
Optical system fixing screws (2 pcs.) removed during installation (iR2545/2535 Series only)

Preparation for Relocating the Machine

When moving the machine using stairs (including steps) or transporting the machine to a
different place using a truck, go through the steps described below.
CAUTION:
When lifting the machine with a double-cassette pedestal, be sure to remove the
double-cassette pedestal in advance.
If the machine is lifted with the double-cassette pedestal installed, they may separate
from each other and consequently the machine can damage.

Work Procedure

1) Remove the drum unit, and then attach the drum cover removed during installation.
9
2) For the iR2545/2535 Series, secure the optical system using the two screws removed
during installation.
3) Secure the front cover, toner supply cover, delivery section, and cassette with tape.
4) Place an A3-size sheet on the document glass, and then secure the document glass cover
(ADF) with tape.
F-9-208
9
x2
F-9-209
9-86
9-86