Relocating The Machine - Canon imageRUNNER ADVANCE C5255 Series Service Manual

Relocating the Machine

If you need to relocate the machine after installation by truck or other means of transportation, be sure to perform the following work in advance:
If you want to move the machine intact with its cassette pedestal, be sure not to use the machine's grips; otherwise,
the machine will come off the cassette pedestal as when it is moved over a step. Be sure to lift the cassette pedestal.
1) Turn OFF the main power supply of the main body.
2) Unplug the power plug of the main body.
3) In the case that the Cassette Pedestal is installed, lift it off from the floor by turning the 4 adjusters on it with a screwdriver.
4) When moving the machine, be sure to push the position indicated in the figure.
CAUTION:
Be sure not to push the upper side of the machine strongly from the front side, otherwise it can fall over. (Especially
in the case of the carpet floor.)
9
Installation > Relocating the Machine
Front
9 Installation > Relocating the Machine
Front
F-9-436
9-167
9-167