Snmp User; Cli Configuration - Tripp Lite NGI-S08C2POE8 Owner's Manual

Group Name
Security Level
Read View
Write View
Notify View
Apply
Refresh
Group Status
Group Name
Security Model
Security Level
Read View
Write View
Notify View
Action
8.2.2. SNMPv3 User

8.2.2.1. CLI Configuration

Node
enable show snmp user
enable configure terminal
snmp user USERNAME
configure
GROUPNAME noauth
snmp user USERNAME
configure GROUPNAME auth
(MD5|SHA) STRINGS
snmp user USERNAME
GROUPNAME priv
configure
(MD5|SHA) STRINGS des
STRINGS
no snmp user USERNAME
configure
GROUPNAME
Enter the v3 user name.
Select the security level of the v3 group to use.
Note that if a group is defined without a read view than all objects are
available to read. (default value is none.)
if no write or notify view is defined, no write access is granted and no
objects can send notifications to members of the group.
(default value is none.)
By using a notify view, a group determines the list of notifications its
users can receive.(default value is none.)
Click Apply to configure the settings.
Click Refresh to begin configuring this screen afresh.
This field displays the v3 user name.
This field displays the security model of the group.
Always displayed v3: User-based Security Model (USM)
This field displays the security level to this group.
These fields display the View list of this group.
Click Delete to remove a v3 group.
Command Description
This command displays all snmp v3 user.
This command changes the node to configure
node.
Configurs v3 user of non- authentication.
Configurs v3 user of authentication.
Configurs v3 user of authentication and
encryption.
This command removes a v3 user from
switch.
140