Web Configuration - Tripp Lite NGI-S08C2POE8 Owner's Manual

6.3.2.

Web Configuration

Parameter
Port Security Settings
Port Security
Port
State
Maximum MAC
Apply
Refresh
Port Security Status
Port
State
Maximum MAC
Description
Select Enable/Disable to permit Port Security on the Switch.
Select a port number to configure.
Select Enable/Disable to permit Port Security on the port.
The maximum number of MAC addresses allowed per interface.
The acceptable range is 1 to 1000.
Click Apply to take effect the settings.
Click Refresh to begin configuring this screen afresh.
This field displays a port number.
This field displays if Port Security is Enabled or Disabled
This field displays the maximum number of MAC addresses
106