Specifications - Makita FS2700 Instruction Manual

ENGLISH (Original instructions)
1-1. Locator
1-2. Front cap
4-1. Switch trigger
4-2. Lock button

SPECIFICATIONS

Capacities
No load speed (min
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal
and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For European countries only
Noise
The typical A-weighted
according to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
Explanation of general view
5-1. Lamp
6-1. Reversing switch lever
7-1. Adjusting ring
7-2. Pointer
Model
Self drilling screw
Machine screw
Wood screw
-1
)
Overall length
Net weight
Safety class
noise level determined
) : 83 dB (A)
pA
) : 94 dB (A)
WA
value (tri-axial vector
2
) : 2.5 m/s or less
h
2
FS2700
301 mm
1.8 kg
ENE033-1
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
ENF002-1
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENG102-2
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Screwdriver
Model No./ Type: FS2700, FS2701
ENG204-2
are of series production and
Conforms to the following European Directives:
sum)
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
ENG901-1
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd,
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
3
8-1. Hook
10-1. Bit
10-2. Sleeve
FS2701
6 mm
8 mm
6.2 mm
0 - 2,500
283 mm
/II
Corporation as the
1.7 kg
ENH101-12
responsible