Download Print this page
Makita FS2700 Repair Manual
Hide thumbs Also See for FS2700:

Advertisement

Quick Links

T
ECHNICAL INFORMATION
Models No.
Description
C
ONCEPT AND MAIN APPLICATIONS
Models FS2700 and FS2701 are screwdrivers
well balanced for easy handling and maneuverability,
featuring the following main benefits;
Best possible tool body for screwdriving
More durable belt clip
6 stage torque adjustment
LED job light
FS2700 and FS2701 feature different bit change systems;
FS2700: Conventional system using leaf spring
FS2701: Bit sleeve
The both models are also available with plastic carrying case
as Models FS2700K and FS2701K.
S
pecification
Voltage (V)
110
120
220
230
240
Specification
No load speed: min.
Driving shank: mm (")
Capacity: mm (")
Torque adjustment
Bit change system
Silent clutch
Variable speed control by trigger
Reverse switch
LED job light
Protection against electric shock
Power supply cord: m (ft)
Net weight*: kg (lbs)
*Weight according to EPTA-Procedure 01/2003
S
tandard equipment
Phillips insert bit 2-45 ....... 1 (only for countries and areas that use N-type spindle)
Plastic carrying case .......... 1 (for FS2700K and FS2701K only)
Note: The standard equipment for the tool shown above may vary by country.
O
ptional accessories
FS2700 and FS2701
Phillips insert bits 2-45, 2-65, 2-110, 2-150, 2-250, 3-45, 3-65, 3-110 Socket bits 7-55, 8-55, 10-55, 10-70, 13-55, 14-55, 3/8"-55
Magnetic socket bits 1/4"-65, 5/16"-65, 3/8"-65, 7/16"-65, 10-65, 5/16"-55, 3/8"-55
FS2700 only
Front caps 12, 15.5, 1/4", 5/16", 3/8", 7/16"
FS2700, FS2701
Screwdriver
Cycle (Hz)
Current (A)
5.5
50/60
6.0
50/60
2.7
50/60
2.6
50/60
2.5
50/60
Model
= rpm
-1
Drywall screw
Self drilling screw
Hex screw
Europe: 4.0 (13.1), Australia,
Other countries: 2.5 (8.2)
Length (L)
Width (W)
Height (H)
*for countries where noise suppressing device
is required to conform to regulations
Continuous Rating (W)
Input
570
---
570
570
570
FS2700
0 - 2,500
6.35 (1/4) Hex
6 (1/4)
6 (1/4)
6 (1/4)
6 stage setting
Conventional system
using leaf spring
No
Yes
Yes
Yes
Double insulation
Brazil: 2.0 (6.6),
1.8 (4.0)
L
H
W
FS2700
Dimensions: mm (")
FS2700
301 (11-7/8)
70 (2-3/4)
192 (7-9/16)
207 (8-1/8)*
Max. Output (W)
Output
260
360
260
260
260
FS2701
Bit sleeve
Europe: 4.0 (13.1)
Other countries: 2.5 (8.2)
1.7 (3.8)
PRODUCT
P 1/ 7
FS2701
FS2701
283 (11-1/8)
500
500
500
500
500

Advertisement

loading

Summary of Contents for Makita FS2700

  • Page 1 6 stage torque adjustment FS2700 FS2701 LED job light Length (L) 301 (11-7/8) 283 (11-1/8) FS2700 and FS2701 feature different bit change systems; Width (W) 70 (2-3/4) FS2700: Conventional system using leaf spring FS2701: Bit sleeve 192 (7-9/16) Height (H)
  • Page 2 Using with 1R045 [2] LUBRICATION Apply Makita grease FA No.2 to the following portions to protect parts and product from unusual abrasion. Gear teeth of Spur gear (Place A: 3g) Cam portion (Place B: 1g) Contact portions (Designated by arrows: a little) Fig.
  • Page 3 P 3/ 7 epair [4] DISASSEMBLY/ ASSEMBLY [4]-1. Clutch portion DISASSEMBLING (FS2700) 1) Remove three 4x30 Tapping screws. (Fig. 3) While holding Gear housing cover complete not to separate from Motor housing, remove Gear housing TC from Gear housing cover complete.
  • Page 4 P 4/ 7 epair [4] DISASSEMBLY/ ASSEMBLY [4]-1. Clutch portion (cont.) DISASSEMBLING (FS2701) 1) Remove three 4x30 Tapping screws. (Fig. 3) While holding Gear housing cover complete not to separate from Motor housing, remove Gear housing TC from Gear housing cover complete. 2) While holding Flat washer 12 and Compression spring 13 so as not to pop out, remove Ring spring 11 from Spindle by enlarging the gap and lifting up the ring portion of Ring spring 11 from the groove of Spindle.
  • Page 5 P5/ 7 epair [4] DISASSEMBLY/ ASSEMBLY [4]-3. Replacing Armature 1) Loosen three 4x25 Tapping screws and remove Handle cover complete and Carbon brushes. (Fig. 14) 2) Loosen three 4x30 Tapping screws and remove the assembled parts of Gear housing, Gear housing cover and Armature from Motor housing.
  • Page 6: Circuit Diagram

    P 6/ 7 ircuit diagram Fig. D-1 (To connect with Field laminations) Color index of lead wires' sheath Black Areas where suppression of White radio interference is required Earth terminal for Noise Field Blue suppressor Brush Brush Purple holder holder Transparent Choke coil...
  • Page 7: Wiring Diagram

    P 7/ 7 iring diagram Fig. D-2 Fix Lead wire of Earth terminal with Lead wire holders. (Earth terminal is not used for areas where suppression of radio interference is not required.) Fix Lead wire with Lead wire holders. Brush holder Brush holder Fix Lead wire with Lead wire holders.

This manual is also suitable for:

Fs2701