Makita FS2700 Instruction Manual
Hide thumbs
Also See for FS2700:
- Instruction manual (45 pages) ,
- Repair manual (7 pages) ,
- Instruction manual (20 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita FS2700
Summary of Contents for Makita FS2700
- Page 1 INSTRUCTION MANUAL Screwdriver FS2700 FS2701 010124 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
EC Declaration of Conformity are double-insulated in accordance with European Standard and can, therefore, also be used from sockets Makita Corporation responsible without earth wire. manufacturer declare that the following Makita ENG102-2 machine(s): For European countries only Designation of Machine: Noise Screwdriver The typical A-weighted noise level determined according Model No./ Type: FS2700, FS2701... - Page 3 Do not abuse the cord. Never use the cord for representative in Europe who is: carrying, pulling or unplugging the power tool. Makita International Europe Ltd, Keep cord away from heat, oil, sharp edges or Michigan, Drive, Tongwell, moving parts. Damaged or entangled cords Milton Keynes, MK15 8JD, England increase the risk of electric shock.
-
Page 4: Specific Safety Rules
23. Keep cutting tools sharp and clean. Properly Depth adjustment maintained cutting tools with sharp cutting edges For Model FS2700 only are less likely to bind and are easier to control. 1. Locator 24. Use the power tool, accessories and tool bits 2. - Page 5 CAUTION: Do not look in the light or see the source of light • directly. To turn on the lamp, pull the trigger. Release the trigger to turn it off. NOTE: Use a dry cloth to wipe the dirt off the lens of lamp. •...
-
Page 6: Operation
Always be sure that the tool is switched off and • unplugged before carrying out any work on the tool. Installing or removing the bit For Model FS2700 To remove the bit, first pull the front cap off and then pull the bit out firmly. 010123 010116... -
Page 7: Maintenance
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Phillips bit • Magnetic socket bit • Front cap •... - Page 8 Makita Corporation Anjo, Aichi, Japan 884918B227...