Chapter 2 - Getting Started; Out Of The Box; Initial Setup For Dolphin 6510 Terminals - Honeywell Dolphin 6510 User Manual

2
Getting Started

Out of the Box

Verify that your carton contains the following items:
• Dolphin 6510 mobile computer (the terminal)
• Battery pack (3.7v, Li-Ion)
• AC power supply
(KSAS0120500200D5; Input: 100-240V AC, 50/60Hz 0.4 Amps; Output: 5 Volts DC, 2.0 A,
Energy Efficiency Level VI)
• Localized plug adapters
Note: Be sure to keep the original packaging in case you need to return the Dolphin terminal for service; see
Customer Support on page 12-1.

Initial Setup for Dolphin 6510 Terminals

Step 1. Install the Battery
The Dolphin 6510 is shipped with the battery packaged separate from the unit. Follow the steps below to
install the battery.
1. Release the strap making it convenient to reach the cover.
2. Remove the battery compartment cover by turning the cover locks upward and removing the cover.
3. Insert the battery into the battery well with the labels facing upward.
4. Replace the cover with a hinging motion and turn the locks downwards.
Cover
Main
Note: The battery door must be installed prior to booting the unit.
5. Replace the hand strap.
2-1