Setting Up The Dolphin Terminal - Honeywell Dolphin 6510 User Manual

Setting Up the Dolphin Terminal

The Dolphin terminal defaults to USB communication out of the box. To verify and/or change the default
setting, tap Start > Settings > Control Panel > PC Connection.
Must be checked to connect to a workstation
Displays the current connection setting
Tap Change Connection to change the current settings.
Connection Options
'USB
Communicating with the Dolphin Terminal
After setting up both the workstation and the terminal, ActiveSync connection should be automatic.
1. Connect the Dolphin terminal to a communication peripheral, such as the Dolphin HomeBase.
2. The Dolphin terminal automatically opens ActiveSync to establish a connection.
Synchronizing with the Host Workstation
After setup, synchronization begins automatically whenever the terminal's mechanical connector
connects to a Dolphin peripheral that is connected to a host workstation with ActiveSync installed.
6-4
Select this option to ...
Establish a USB connection.
Tap to change the connection settings