Front Panel Features - Honeywell Dolphin 6510 User Manual

Front Panel Features

Scan/Decode LED
The LED lights red when you press the Scan trigger in scanning applications. The LED lights
green when a scanned bar code is successfully decoded.
The LED lights red while the main battery is charging.
The LED lights green when the main battery charging is completed. The LED lights blue
during soft and hard resets.
The LED is user-programmable. Please refer to the explanation in the SDK document.
Honeywell D6x10 Device SDK for Windows CE 6.0 > Visual C++ Development > Device API >
Functions > devSetLEDState
Keypad
28-key numeric keypad (alpha shifted) and 52-key full alphanumeric keypads are available.
Microphone
The integrated microphone can be used for audio recording.
Touch Screen Display
The display is a 3.5" transmissive active matrix, 65k color LCD display with a backlight, QVGA
(240 x 320 resolution); see
resistive touch.
Dolphin 6510s ship with a screen protector already installed over the touch screen lens
to help prevent damage to the touch screen. Do NOT remove this screen protector before
initial use. Honeywell recommends using screen protectors, especially for applications
that require high volume interfacing with the touch screen. For more information, see
Using Screen Protectors
contacting your Honeywell sales representative.
For touch screen input, use the stylus included with the terminal or your finger. The
method you choose depends on which one is most appropriate for your application.
While there is a great deal of variation in different applications, you generally achieve
greater accuracy with the stylus for buttons or icons that are close together.
Use of objects, such as paper clips, pencils, or ink pens on the touch screen can damage
the input panel and may cause damage not covered by the warranty.
3-2
Display Backlight on page
on page 3-3. You can purchase additional screen protectors by
3-3. The touch panel is a 4-wire analog