Parts Description; Functional Description; Installing Or Removing Battery Cartridge - Makita DVC150L Instruction Manual

3. Charge the battery cartridge with room tem-
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
a hot battery cartridge cool down before
charging it.
4. When not using the battery cartridge, remove
it from the tool or the charger.
5. Charge the battery cartridge if you do not use
it for a long period (more than six months).

PARTS DESCRIPTION

Model DVC150L
(Cloth filter (for dry and wet dust) model)
► Fig.1: 1. Tank cover 2. Float 3. Float cage 4. Cloth
filter 5. Tank
Model DVC151L
(Powder filter (for dry dust) model)
► Fig.2: 1. Tank cover 2. Powder filter (HEPA)
3. Damper 4. Prefilter 5. Tank
FUNCTIONAL
DESCRIPTION
Use with AC power:
WARNING:
Before plugging the cleaner,
always make sure that the cleaner is switched off.
Plugging the cleaner with the switch on may cause an
unexpected start resulting in serious personal injury.
Connect the plug to a power supply.
► Fig.3: 1. Plug (the shape and cord length may differ
from country to country)
The AC power indicator lights up when setting the
stand-by switch to "I" side.
► Fig.4: 1. AC power indicator
NOTE: Even operating in DC power mode, the
cleaner is automatically changed into AC power mode
when plugged in.
NOTE: If the cleaner is unplugged during opera-
tion with the battery inserted, the cleaner gets into
stand-by state.
Use with battery:
CAUTION:
Always be sure that the cleaner is
switched off, unplugged, and the battery cartridge
is removed before adjusting or checking function
on the cleaner.
Installing or removing battery
cartridge
CAUTION:
Always switch off the tool before
installing or removing of the battery cartridge.
CAUTION:
Hold the cleaner and the battery
cartridge firmly when installing or removing bat-
tery cartridge. Failure to hold the cleaner and the
battery cartridge firmly may cause them to slip off
your hands and result in damage to the cleaner and
battery cartridge and a personal injury.
CAUTION:
Be careful not to pinch your fin-
gers when opening or closing the battery cover.
Failure to do so may cause personal injury.
To install the battery cartridge, release the lock first, and
then open the battery cover. After that, insert the battery
cartridge.
► Fig.5: 1. Lock 2. Battery cover
Align the tongue on the battery cartridge with the groove
in the housing and slip it into place. Insert it all the way
until it locks in place with a little click. Then lock the
battery cover.
► Fig.6: 1. Battery cartridge
To remove the battery cartridge, slide it from the tool
while sliding the button in front of the cartridge.
CAUTION:
Always install the battery cartridge
fully until the red indicator cannot be seen. If not,
it may accidentally fall out of the cleaner, causing
injury to you or someone around you.
CAUTION:
Do not install the battery cartridge
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
NOTE: The cleaner does not work with only one
battery cartridge.
NOTE: Remove the plug of the cleaner from the
extension cord when using the cleaner with the
batteries.
10 ENGLISH