Table of Contents
Advertisement
Performing an Exam
Using Scan Coach (continued)
NOTE:
2-24
2. Press Scan Coach key on the control panel to activate the
Scan Coach function. The Scan Coach addendum displays,
refer to 'Scan Coach (Option)' on page 2-18 for detailed
information. Select Acknowledge to continue.
Figure 2-4. Scan Coach Addendum
Or select Cancel not to start Scan Coach.
Check the box before Don't show next time and the Scan
Coach addendum won't display next time.
3. Select the protocol from the pull-down menu, and then
select Start.
If there is only one program in the current application, the
system will display the Scan Coach screen directly. This
step is only available when there are two or more programs.
Figure 2-5. Scan Coach Start
–
Versana Essential
5759238-100 English Rev. 2
User Guide
Advertisement
Table of Contents
