Vendor Specific Commands; Osd Display - Asus Aaeon UP Xtreme UPX-WHL01 User Manual

5.1.9

Vendor Specific Commands

Command Feature: This feature allows a set of vendor specific commands to be used
to communicate between devices.
The following messages are used for the Vendor Specific Commands feature: <Device
Vendor ID>, <Give Device Vendor ID>, <Vendor Command>, <Vendor Command
With ID>, <Vendor Remote Button Down>, <Vendor Remote Button Up>
OpCode Value
<Device 0x87
Vendor ID>
<Give 0x8C
Device
Vendor ID>
<Vendor 0x89
Command>
<Vendor 0xA0
Command
With ID>
<Vendor 0x8A
Remote
Button
Down>
5.1.10

OSD Display

Command Feature: This feature allows a device to transfer a text string to the TV for
On Screen Display. The <Set OSD String> message is used to transfer the text string to
the TV.
The following message is used for the OSD Display feature: <Set OSD String>
Table on Next Page
CEC Client Installation
Description Parameters
Reports the [Vendor ID]
vendor ID of this
device.
Requests the None
Vendor ID from a
device.
Allows vendor [Vendor
specific Specific
commands to be Data]
sent between two
devices.
Allows vendor [Vendor ID]
specific [Vendor
commands to be Specific
sent between two data]
devices or
broadcast.
Indicates that a [Vendor
remote control Specific RC
button has been Code]
depressed.
Response Supported
Any other Yes
interested device
may store the
vendor ID of the
device.
<Device Vendor Yes
ID>
Vendor Specific Yes
Vendor Specific Yes
Vendor Specific Yes
43