Flashing Dfu Firmware On Stm Board - Windows - Asus Aaeon UP Xtreme UPX-WHL01 User Manual

CEC-Client and libCEC-AAEON require installing GDebi in order to run on Ubuntu.
This step is performed in Terminal (Command Line). In Terminal, enter the command:
sudo apt-get install gdebi
After the process is completed, libCEC can be installed. Run the installer
libcec4_4.0.4.1~bionic_amd64.deb from the deliverables folder. You may
be required to enter the administrator password, after which installation will occur
automatically.
Image 7: Successful Installation
To use libCEC with Kodi, simply install Kodi with the command:
sudo apt-get install kodi
2.4 Flashing DFU Firmware on STM Board – Windows
This section details the procedures for dropping the .dfu (Device Firmware Update)
firmware file on board and MCU's firmware update for delivered firmware on Windows
platforms.
CEC Client Installation 9