OpCode
Value
<Set Timer
0x67
Program
Title>
<Timer
0x43
Cleared
Status>
<Timer
0x35
Status>
5.1.6
System Information
Command Feature: This feature allows devices to automatically use the same OSD and
Menu language settings as the TV and also for a TV to discover the current language
when it is being installed.
The following messages are used for the System Information feature: <CEC Version>,
<Get CEC Version>, <Get Menu Language>, <Give Physical Address>, <Polling
Message>, <Report Physical Address>, <Set Menu Language>.
Table on Next Page
CEC Client Installation
Description
Parameters
Used to set the
[Program Title
name of a
String]
program
associated with
a timer block.
Sent directly
after sending a
<Set Analogue
Timer> or <Set
Digital Timer>
message. The
name is then
associated with
that timer block.
Used to give
[Timer Cleared
the status of a
Status Data]
<Clear
Analogue
Timer>, <Clear
Digital Timer>
or <Clear
External Timer>
message
Used to send
[Timer Status
timer status to
Data]
the initiator of a
<Set Timer>
msg
Response
Supported
Recording device
Yes
stores title for
future reference.
Ignore message if
it is not the
immediate next
message from this
initiator following
a <Set Analogue
Timer> or <Set
Digital Timer>
message.
If the message
Yes
indicates that the
timer was not
cleared because
there was no
matching entry,
the device should
remove the timer
block locally.
None
Yes
38