Tuner Control - Asus Aaeon UP Xtreme UPX-WHL01 User Manual

OpCode Value
<Play> 0x41
5.1.8

Tuner Control

Command Feature: This feature allows a device (e.g. TV) to control another CEC
device's tuner.
The following messages are used for the Tuner Control feature: <Give Tuner Device
Status>, <Record On>, <Select Analogue Service>, <Select Digital Service>, <Tuner
Step Decrement>, <Tuner Step Increment>, <Tuner Device Status>.
OpCode Value
<Give Tuner 0x08
Device
Status>
<Record 0x09
On>
Table Continues on Next Page
CEC Client Installation
Description Parameters
Used to [Play
control the Mode]
playback
behavior of a
source device.
Description
Used to request
the status of a
tuner device.
Attempt to
record the
specified source.
Response
Perform the specified
actions, or return a
<Feature Abort>
message. If media is
available the device
enters 'Deck Active'
state. If the device is in
standby, has media
available and the
parameter is ["Play
Forward"] it should
power on.
Parameters Response
[Status Respond with a
Request] <Tuner Device
Status> message,
or stop reporting
changes on
receipt of
the["Off"]
message.
[Record Enter 'Recording'
Source] state and start
recording if
possible. Send the
initiator <Record
Status>.
Supported
Yes
Supported
Yes
Yes
41