Hour Meter (Digital Type); Warning System; Overheat Warning - Yamaha 60F Owner's Manual

EMU26650

Hour meter (digital type)

This meter shows the number of hours the
engine has been run. It can be set to show
the total number of hours or the number of
hours for the current trip. The display can
also be turned on and off.
Changing the display format
G
Pressing the "
G
es the display format in the following pat-
tern:
Total hours→Trip hours→Display off
G
Resetting the trip hours
G
Simultaneously pressing the "
G
and " " (mode) buttons for more than
1 second while the trip hours are displayed
resets the trip counter to 0 (zero).
NOTE:
The total number of hours the engine has
been run cannot be reset.
EMU26801

Warning system

ECM00090
CAUTION:
Do not continue to operate the engine if a
warning device has activated. Consult
your Yamaha dealer if the problem can-
not be located and corrected.
ZMU01870
" (mode) button chang-
" (set)
Basic components
EMU26817

Overheat warning

This engine has an overheat-warning de-
vice. If the engine temperature rises too high,
the warning device will activate.
Activation of warning device
The engine speed will automatically de-
G
crease to about 2000 r/min.
If equipped with an overheat-warning indi-
G
cator, it will light or blink.
The buzzer will sound (if equipped on the
G
tiller handle, remote control box, or main
switch panel).
ZMU04766
ZMU01757
19