Oil Level Indicator (Digital Type); Overheat-Warning Indicator (Digital Type); Trim Meter (Digital Type) - Yamaha 60F Owner's Manual

Hide thumbs Also See for 60F:
Table of Contents

Advertisement

Basic components
1. Oil level indicators
EMU26550

Oil level indicator (digital type)

This indicator shows the engine oil level. If
the oil level falls below the lower limit, the
warning indicator will start to blink. For fur-
ther information, see page 20.
ECM00030
CAUTION:
Do not operate the engine without oil. Se-
rious engine damage will occur.
1. Oil level indicator
EMU26582
Overheat-warning indicator (digital
type)
If the engine temperature rises too high, the
warning indicator will start to blink. For fur-
ther information on reading the indicator, see
18
page 19.
ECM00051
CAUTION:
Do not continue to run the engine if the
overheat-warning indicator is on. Serious
engine damage will occur.
1
ZMU04580
1
1. Overheat-warning indicator
EMU26620

Trim meter (digital type)

This meter shows the trim angle of your out-
board motor.
NOTE:
Memorize the trim angles that work best
G
for your boat under different conditions.
Adjust the trim angle to the desired using
the power trim and tilt switch.
If the trim angle of your motor exceeds the
G
trim operating range, the top segment on
the trim meter display will blink.
1
ZMU01867
ZMU01868
ZMU01869

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

70b

Table of Contents