Operation; Maintenance - Makita DFJ212A Instruction Manual

Cordless fan jacket, cordless fan vest
Hide thumbs Also See for DFJ212A:
Table of Contents

Advertisement

OPERATION

To turn on the fan, press and hold the power button. The fan
starts at the maximum power level 4. Each time you press the
power button, the power level changes from 4 to 1, and returns
to 4. The power level indicator shows the current setting.
To turn off, press and hold the power button again.
Battery holder
► 1. Power level indicator 2. Power button
Battery BL1055B
1
► 1. Power level indicator 2. Power button

MAINTENANCE

CAUTION:
Always be sure that the jacket is switched
off and the battery cartridge or Battery BL1055B is removed
before attempting to perform inspections or maintenance.
CAUTION:
If the jacket/vest does not switch on or
any fault is found with a fully charged battery cartridge,
clean the terminals of the battery holder and the battery car-
tridge. If the jacket still does not work properly, stop using
the jacket/vest and contact our authorized service center.
NOTICE:
Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
1
2
2
15 ENGLISH
Cleaning the fan unit
Wipe off dirt, dust, oil, grease .etc, with clean dry cloth.
To clean the fan blade, remove the ring and unhook
the housing from the cover using slotted screwdriver or
similar. There are three hooks on the housing. Unhook
them little by little in rotation so as not to break the
hooks.
► 1. Slotted screwdriver 2. Housing 3. Cover 4. Hole
5. Fan blade 6. Hook
NOTICE:
Do not remove the fan blade from the
housing.
NOTICE:
Do not wash the fan unit with water.
Be sure to attach the cover after cleaning the fan blade.
Place the cover onto the housing as shown in the figure
(note the direction of the logo on the cover and the loop
on the housing). Align the hooks with the holes and then
snap it on.
2
► 1. Logo on the cover 2. Loop on the housing
1
2
3
4
5
6
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dfj213aDfj214aDfj216aDfj312aDfj416aDfv210a ... Show all

Table of Contents