Battery Protection System - Makita DFJ212A Instruction Manual

Battery BL1055B
While the battery BL1055B is unplugged, press the
power button. The battery capacity indicator light up for
a few seconds.
► 1. Battery capacity indicator
Meaning of the indicator lamp
Indicator lamps
Lighted Off

Battery protection system

The device is equipped with a battery protection sys-
tem. This system automatically cuts off power to the
motor to extend battery life.
If the remaining battery capacity is too low, the device
will not operate. When you turn the device on, the motor
will run again, but stops soon. In this situation, remove
and recharge the battery cartridge.
Air flow
Air flow inside the jacket is shown below.
1
Remaining
capacity
Blinking
51% to 100%
26% to 50%
11% to 25%
Less than
11%
Battery
abnormality
For the jacket with the hood, wear the hood over your helmet. The
air from the fan goes through the helmet and cools your head.
Battery pocket
NOTE: Some jacket/vest does not have the battery
pocket. Refer to the section for the specifications for
the features of your jacket/vest.
Use the battery pocket for storing the battery or the
holder (with battery) inside the jacket/vest.
CAUTION:
Always fasten the snap buttons
when the battery is stored in the pocket.
Mesh pocket
NOTE: Some jacket/vest does not have the mesh
pocket. Refer to the section for the specifications for
the features of your jacket/vest.
Use mesh pockets on the back of the jacket/vest for storing ice packs.
1
► 1. Mesh pocket
13 ENGLISH