How To Configure A Mains Powered Dau - Honeywell GENT COMPACT-MAINS-DAU Commissioning Instructions

How to configure a Mains Powered DAU

To configure a Mains Powered DAU in a Vigilon Compact VA system and make the necessary settings, you will need to connect the
Commissioning tool to the Vigilon Compact VA panel. The Mains Powered DAU are connected to the device and audio loop circuits
of the Vigilon Compact VA panel. The following procedure assume you have retrieved a system configuration data to the
Commissioning tool and the configuration file is open.
Follow steps jklmn.. to configure each Mains Powered DAU.
j
Open the Mains Powered DAU configuration window in the Commissioning tool.
Menu option
Configuration
a
Mains Powered DAU Config...
b
Select 'Sector' in the tree view
and set Signals. Otherwise
select the Mains Powered DAU.
You can select and play a tone You can select and play a tone
or message before setting the or message before setting the
the required the required Signal Signal
NOTE: Only the tones and
messages that are applicable
to the Mains Powered DAU
are shown here.
www.acornfiresecurity.com
at at . .
This area shows the current information about the selected
Mains Powered DAU device connected to a loop circuit like its:
Hardware ID, Audio Pack and Firmware versions.
www.acornfiresecurity.com
Mains Powered DAU
Icon selection
23